DEPA.620D Precision Cutting Oil - Heavy-Duty Mineral Oil from China Suppliers and Factory for Superior Machining Performance
-
🔧
Very good lubricity and EP property to enhance surface finishing and dimensional control of components.
-
⚙️
Excellent performance for heavy duty cutting of high hardness ferrous metals.
-
💧
Good defoaming performance.
-
🛡️
Excellent anti-rust property to protect the metal parts from rusting even after machining.
| Test | Unit | Typical |
|---|---|---|
| Density（g/cm³）@20℃ | / | 0.86 |
| Viscosity @40℃ | CSt | 17.8 |
| Open flash point | ℃ | ≥180 |
| Colour | / | Brown transparent |
While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
-
Each type of machinery is marked with a simple diagram indicating the parts that need to be refueled, the name of the oil product, the refueling cycle, etc., and is managed by a dedicated person to avoid using the wrong oil product.
-
Use dedicated containers for each type of oil, and label the container with the name of the oil to prevent contamination.
-
After each addition or replacement of lubricating oil, keep a mechanical maintenance record.
-
Rust inhibitor must be added to the cooling water circulation system of the injection molding machine to prevent the formation of scale, which can cause corrosion and leakage of the heat exchanger into the hydraulic system.
-
Keep the fuel tank sealed to prevent the entry of dust and moisture.
Attention must be paid to using specialized oil pumps for various types, especially for pure oil and water-based coolant. Mixing oil pumps is extremely avoided, as it may cause corrosion and increased wear of metal parts in the equipment lubrication system. It is also possible to mix cutting fluid with miscellaneous oil, which can easily breed bacteria and shorten the service life.