0102030405
DEPA.WTA02-2 Cleaning Agent - Effective Solution from China Suppliers and Factory for Mineral Oils and Paint Stains
Advantages
- ✔Does not corrode the material.
- ✔Strong cleaning power.
- ✔The proportion of water dilution can be high, and the overall cost is lower.
- ✔In line with the EU RoHS environmental directive.
- ✔Safe!
Typical Data
| Test | Unit | Typical |
|---|---|---|
| Density @20℃ | kg/l | 1.05 |
| Appearance | — | Light yellow transparent |
| pH Value @ 2% | / | 11.35 |
Methods and Procedures of Use
|
📋 Procedures of Use:
◆ Water to ratio: 3~10% ◆ Cleaning temperature: 40°C ~ 60°C ◆ Cleaning time: 2~8 min |
|
🔧 Methods:
◆ Ultrasonic cleaning（3min）→Drip clean（1min）→Air-dry / Bake dry→Antirust Packaging
◆ Rinse with warm water（5~20min）→Drip clean（1min）→Air-dry / Bake dry→Antirust Packaging |
While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
Take Care
Small details that prevent you from wasting money unnecessarily
- Consult with lubrication experts, use lubricants of appropriate specifications, and minimize the types of oil used.
- Each type of machinery is marked with a simple diagram indicating the parts that need to be refueled, the name of the oil product, the refueling cycle, etc., and is managed by a dedicated person to avoid using the wrong oil product.
- Before each refueling, clean and wipe containers and tools such as oil pumps and oil pots.
- Rust inhibitor must be added to the cooling water circulation system of the injection molding machine to prevent the formation of scale, which can cause corrosion and leakage of the heat exchanger into the hydraulic system.
- Replace the filter element at the same time as each oil change.
- Keep the fuel tank sealed to prevent the entry of dust and moisture.
Frequently Asked Questions (FAQ)
❓What is the recommended dilution ratio for this cleaner?
The recommended water-to-cleaner ratio is 3%~10%, depending on the level of contamination and the specific application requirements.
❓Is this cleaner safe for use on metal parts?
Yes. This cleaner is specifically formulated to not corrode materials, making it safe for use on a wide range of metal components and surfaces.
❓What cleaning temperature is recommended?
The optimal cleaning temperature range is 40°C to 60°C. Operating within this range ensures effective cleaning performance while protecting the material being cleaned.
❓Does this product comply with environmental regulations?
Yes. This product is fully compliant with the EU RoHS environmental directive, ensuring it meets strict standards for hazardous substance restrictions.
❓What cleaning methods can be used with this product?
Two methods are supported: ultrasonic cleaning (approximately 3 minutes) followed by drip cleaning and drying, or rinsing with warm water (5~20 minutes) followed by drip cleaning and drying. Both methods should end with antirust packaging.
❓How can I ensure the longest service life for machinery using this cleaner?
To maximize machinery lifespan, always use lubricants of appropriate specifications, keep fuel tanks sealed, replace filter elements with every oil change, and add rust inhibitors to cooling water circulation systems to prevent scale and corrosion.