0102030405
DEPA.WTA02-2 Cleaning Agent from China Suppliers and Factory for Effective Oil and Stain Removal on Various Metals
✅ Advantages
- 🛡️Does not corrode the material.
- 💪Strong cleaning power.
- 💧High water dilution ratio available — overall cost is lower.
- 🌿In line with the EU RoHS environmental directive.
- ✔️Safe!
📊 Typical Data
| Test | Unit | Typical |
|---|---|---|
| Density @20℃ | kg/l | 1.05 |
| Appearance | °C | Light yellow transparent |
| pH Value @ 2% | / | 11.35 |
🔧 Methods and Procedures of Use
⚙️ Procedures of Use
💧 Water ratio: 3 ~ 10%
🌡️ Temperature: 40°C ~ 60°C
⏱️ Cleaning time: 2 ~ 8 min
🔬 Method 1 — Ultrasonic Cleaning
Ultrasonic Cleaning (3 min)
→
Drip Clean (1 min)
→
Air-dry / Bake Dry
→
Antirust Packaging
🚿 Method 2 — Warm Water Rinse
Rinse with Warm Water (5 ~ 20 min)
→
Drip Clean (1 min)
→
Air-dry / Bake Dry
→
Antirust Packaging
While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
⚠️ Take Care
Small details that prevent you from wasting money unnecessarily.
- 1 Consult with lubrication experts, use lubricants of appropriate specifications, and minimize the types of oil used.
- 2 Each type of machinery should be marked with a simple diagram indicating the parts that need to be refueled, the name of the oil product, the refueling cycle, etc., and managed by a dedicated person to avoid using the wrong oil product.
- 3 Before each refueling, clean and wipe containers and tools such as oil pumps and oil pots.
- 4 Rust inhibitor must be added to the cooling water circulation system of the injection molding machine to prevent the formation of scale, which can cause corrosion and leakage of the heat exchanger into the hydraulic system.
- 5 Replace the filter element at the same time as each oil change.
- 6 Keep the fuel tank sealed to prevent the entry of dust and moisture.
❓ Frequently Asked Questions
Q What dilution ratio should I use for this cleaner?
The recommended water-to-cleaner ratio is 3% to 10%, depending on the level of contamination. A higher dilution ratio helps reduce overall cost while still maintaining effective cleaning performance.
Q Will this cleaner corrode or damage metal parts?
No. This cleaner is specifically formulated to avoid corroding the material being cleaned. It is safe for use on metal components when used at the recommended dilution and temperature.
Q What is the ideal cleaning temperature and time?
The optimal cleaning temperature is between 40°C and 60°C, with a cleaning duration of 2 to 8 minutes. Staying within these ranges ensures effective cleaning without unnecessary energy consumption.
Q Is this product compliant with EU environmental regulations?
Yes. This cleaner complies with the EU RoHS environmental directive, making it a responsible choice for manufacturers who need to meet European environmental standards.
Q Can I use both ultrasonic cleaning and warm water rinsing methods?
Yes. Both methods are supported. Ultrasonic cleaning (3 min) is ideal for precision parts, while warm water rinsing (5–20 min) suits general applications. Both processes end with drip cleaning, drying, and antirust packaging.
Q How can I extend the service life of machinery lubricants and hydraulic systems?
Key practices include using the correct lubricant specifications, keeping fuel tanks sealed against dust and moisture, replacing filter elements with every oil change, and adding rust inhibitor to cooling water systems to prevent scale buildup and heat exchanger damage.