0102030405
DEPA.610MG Precision Gear Grinding Oil - High Performance Synthetic Oil from China Suppliers and Factory
Advantages
- 🔧 Very good lubricity and EP property to enhance surface finishing and dimensional control of components.
- 🔥 High flash point, low oil smoke and oil mist, providing users with better safety.
- 📦 One product is suitable for many operations and thus oil inventory can be minimized.
- 🛡️ Excellent anti-rust property to protect the metal parts from rusting even after machining.
Typical Data
| Test | Unit | Typical |
|---|---|---|
| Density | / | 0.84 |
| Viscosity @40℃ | CSt | 9.6 |
| Open Flash Point | ℃ | ≥180 |
| Colour | / | Yellow Transparent |
| Odour | / | Mild |
While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
Take Care
Small details that prevent you from wasting money unnecessarily
- 1 Consult with lubrication experts, use lubricants of appropriate specifications, and minimize the types of oil used.
- 2 Before each refueling, clean and wipe containers and tools such as oil pumps and oil pots.
- 3 Before changing the oil, the machinery must be washed clean with solvent, and water-soluble cleaning agents must not be used.
- 4 If any abnormalities are found in the oil product or it has reached the oil change cycle, a sample should be taken and sent to a professional company for analysis and decision.
- 5 Replace the filter element at the same time as each oil change.
Frequently Asked Questions
Q
What makes this cutting oil suitable for multiple machining operations?
This cutting oil is formulated with excellent lubricity and EP (extreme pressure) properties, allowing it to perform effectively across a wide range of machining operations. Its versatility helps reduce the need for multiple specialized oils, simplifying inventory management.
Q
Why is a high flash point important for cutting oil?
A high flash point (≥180℃) means the oil is less likely to ignite during high-speed or high-temperature machining processes. This significantly reduces fire hazards in the workplace and contributes to a safer working environment for operators.
Q
How does this oil protect machined parts from rust?
The oil contains anti-rust additives that form a protective film on metal surfaces after machining. This film prevents moisture and oxygen from contacting the metal, effectively inhibiting rust formation during storage or between production processes.
Q
Can water-soluble cleaning agents be used when changing this cutting oil?
No. Water-soluble cleaning agents should not be used when changing this oil. Before an oil change, machinery must be thoroughly cleaned with an appropriate solvent to avoid contamination or chemical reactions that could compromise the performance of the new oil.
Q
How do I know when it's time to change the cutting oil?
Oil should be changed based on the recommended oil change cycle or whenever abnormalities are observed — such as changes in color, odor, viscosity, or performance. It is advisable to collect a sample and send it to a professional laboratory for analysis to determine the exact condition of the oil.
Q
Should the filter element be replaced every time the oil is changed?
Yes. It is strongly recommended to replace the filter element simultaneously with each oil change. A used filter element may contain contaminants, degraded particles, or residues that can quickly deteriorate the quality of the fresh oil and reduce its effective service life.