0102030405
DEPA.860BH Soluble Cutting Fluid - Premium China Suppliers & Factory for Steel, Aluminum, and Cast Iron Machining
Advantages
- Multifunction for all operation and materials.
- Super lubricant performance and provide good surface finishing.
- Good anti-rust performance.
- Selected bactericide and additive which guarantee long life.
- Non-sulfur and phosphorus, is harmful to the environment and health.
Typical Data
| Concentrate | ||
| Density @15℃ | 1.01 | |
| Appearance | Yellow liquid | |
| Emulsion | ||
| Appearance | Milky White | |
| pH Value @ 5% | 9.0 | |
| Refraction factor | 1.4 | |
Recommended Dilutions
- Light cutting and grinding 3–5%
- General machining 5%
- Medium and heavy load cutting 7–10%
- Heavy load cutting 10–20%
While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
Frequently Asked Questions
Q
What types of machining operations is this cutting fluid suitable for?
This cutting fluid is a multifunction product suitable for all types of machining operations and materials, including light cutting, grinding, general machining, and heavy load cutting.
Q
What dilution ratio should I use for heavy load cutting?
For heavy load cutting applications, a dilution ratio of 10–20% is recommended to ensure adequate lubrication and cooling performance under high-stress conditions.
Q
Is this cutting fluid safe for operators and the environment?
Yes. The fluid is formulated without sulfur and phosphorus, making it less harmful to both the environment and operator health compared to conventional cutting fluids.
Q
How does this fluid help extend the service life of the coolant sump?
The fluid contains selected bactericide and additives that inhibit microbial growth and degradation, significantly extending the working life of the coolant in the sump.
Q
What is the recommended pH value of the emulsion at 5% concentration?
At a 5% concentration, the emulsion maintains a pH value of 9.0, which provides a mildly alkaline environment that supports anti-rust protection and inhibits bacterial growth.
Q
Does this cutting fluid provide rust protection for machined parts?
Yes. The fluid offers good anti-rust performance, helping to protect both machined workpieces and machine tool surfaces from corrosion during and after the machining process.