0102030405
DEPA.950-3H Soluble Cutting Fluid from China Suppliers - Eco-Friendly Factory Solution for Non-Metallic Materials
Advantages
- Inherent cleanliness property and preservation ability enable extremely long use.
- Excellent anti foam performance.
- Can use in high hardness water environment.
- Leakproof effectively inhibit microbial propagation.
- Inhibit chips to stick on the wheel.
Typical Data
| Concentrate | |
| Density (g/cm³) @20℃ | 1.22 |
| Appearance | Brown transparent |
| Emulsion | |
| Appearance | Light yellow transparent |
| pH Value @ 5% | 8.5 |
| Refraction factor | 1.7 |
Recommended Dilutions
Light cutting and grinding
3.5 - 5%
General machining
5%
Medium and heavy load cutting
8 - 12%
While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
Frequently Asked Questions
What are the primary operational advantages of this product?
This product offers excellent anti-foam performance, inherent cleanliness for long-term use, microbial inhibition to prevent degradation, and prevents metal chips from sticking to grinding wheels.
Can this product be used with hard water?
Yes, it is specially formulated to maintain high performance and stability even when used in high hardness water environments.
What is the recommended dilution ratio for general machining?
For general machining applications, a dilution concentration of 5% is recommended. For heavy load cutting, you may increase this to 8-12%.
What are the typical pH value and physical appearance of the emulsion?
At a 5% dilution, the emulsion exhibits a pH value of 8.5 and has a light yellow, transparent appearance.
Are the typical data values guaranteed specifications?
No, the typical data points (such as density and refraction factor) represent current production standards and are subject to minor variations. They do not constitute a warranty.