0102030405
DEPA.TG46 Precision Rail Oil - High-Quality Multi-Purpose Oil from China Suppliers & Factory for Hydraulic Systems
Advantages
- ⏳ Very long service life.
- 🛡️ Excellent anti-scuffing property gives special protection even when high speed, high pressure and high temperature conditions are encountered.
- 🔒 Excellent corrosion and rust prevention.
- 💧 Good demulsibility promotes quicker water separation. If water is an unavoidable contaminant, this advantage effectively retains lubrication.
- 💨 Anti-foam additive allows any entrained air to be released and burst quickly, ensuring enough lubrication between machine parts at any time.
Typical Data
| Test | Unit | Typical | |||
|---|---|---|---|---|---|
| TG32 | TG46 | TG68 | TG100 | ||
| Density @20°C | Kg/L | 0.850 | 0.853 | 0.865 | 0.880 |
| Viscosity @40℃ | CSt | 32 | 46 | 68 | 100 |
| Viscosity Index | / | 123 | 115 | 115 | 100 |
| Flash Point | ℃ | 215 | 250 | 260 | 260 |
| Pour Point | ℃ | -20 | -16 | -16 | -10 |
While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
Take Care
🏷️
Each type of machinery should be marked with a simple diagram with the parts that need oiling, the name of the oil, the oiling cycle, etc., and be assigned to a specific person to avoid using the wrong oil.
⚠️
For all kinds of different types, it is essential to use dedicated oil pumps. In particular, pure oil and water-based coolant must not be mixed with oil pumps. This may cause rust on metal parts in the equipment's lubrication system and increase wear. Moreover, the cutting fluid mixed with impurities may breed bacteria, thereby shortening its service life.
✅
Depa has passed ISO9001, ISO14000, SGS, Guangyan Testing and other certifications, obtained various qualification certificates related to import and export, and has been recognized by many high-end precision machine tool equipment manufacturers, becoming a highly recommended brand.
Frequently Asked Questions
Q
What viscosity grade should I choose for my machinery?
The right viscosity grade depends on your equipment's operating temperature and load conditions. TG32 and TG46 are suitable for lighter loads and lower operating temperatures, while TG68 and TG100 are recommended for heavier loads and higher temperature environments. Always refer to your machine manufacturer's specifications.
Q
How does the anti-scuffing property protect my equipment?
The anti-scuffing additive forms a protective film on metal surfaces, preventing direct metal-to-metal contact even under extreme conditions such as high speed, high pressure, and elevated temperatures. This significantly reduces surface wear and extends the service life of machine components.
Q
Can this oil be mixed with water-based coolants?
No. Pure oil and water-based coolants must never be mixed using the same oil pump. Mixing can cause rust on metal parts within the lubrication system, increase wear, and allow bacteria to breed in the cutting fluid — all of which shorten the product's service life and damage equipment.
Q
What certifications does Depa hold for this product?
Depa has obtained ISO9001 (quality management), ISO14000 (environmental management), SGS, and Guangyan Testing certifications. The company also holds various import and export qualification certificates and has been recognized by numerous high-end precision machine tool manufacturers worldwide.
Q
How should lubrication management be organized in a facility?
Each machine should be labeled with a clear diagram indicating which parts require lubrication, the correct oil type, and the recommended oiling cycle. Responsibility should be assigned to a designated person to ensure consistency and prevent the use of incorrect lubricants, which can lead to equipment damage.
Q
What is the significance of the flash point and pour point values?
The flash point indicates the minimum temperature at which the oil can ignite, which is a key safety parameter — higher flash points (215–260°C across grades) mean safer operation at elevated temperatures. The pour point indicates the lowest temperature at which the oil remains fluid, ensuring reliable lubrication in cold start conditions down to -20°C for TG32.