0102030405
DEPA.WTA02-2 Cleaning Agent - Effective Solution from China Suppliers and Factory for Metal Surfaces and Paints
Advantages
- ✓ Does not corrode the material.
- ✓ Strong cleaning power.
- ✓ The proportion of water dilution can be high, and the overall cost is lower.
- ✓ In line with the EU RoHS environmental directive.
- ✓ Safe!
Typical Data
| Test | Unit | Typical |
|---|---|---|
| Density @20℃ | kg/l | 1.05 |
| Appearance | °C | Light yellow transparent |
| pH Value @ 2% | / | 11.35 |
Methods and Procedures of Use
|
Procedures of Use:
◆
Water to ratio: 3~10%
◆
Cleaning temperature: 40°C ~ 60°C
◆
Cleaning time: 2~8 min
|
|
Methods:
◆
Ultrasonic cleaning (3min)
→
Drip clean (1min)
→
Air-dry / Bake dry
→
Antirust Packaging
◆
Rinse with warm water (5~20min)
→
Drip clean (1min)
→
Air-dry / Bake dry
→
Antirust Packaging
|
While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
Take Care
Small details that prevent you from wasting money unnecessarily
- 1 Consult with lubrication experts, use lubricants of appropriate specifications, and minimize the types of oil used.
- 2 Each type of machinery is marked with a simple diagram indicating the parts that need to be refueled, the name of the oil product, the refueling cycle, etc., and is managed by a dedicated person to avoid using the wrong oil product.
- 3 Before each refueling, clean and wipe containers and tools such as oil pumps and oil pots.
- 4 Rust inhibitor must be added to the cooling water circulation system of the injection molding machine to prevent the formation of scale, which can cause corrosion and leakage of the heat exchanger into the hydraulic system.
- 5 Replace the filter element at the same time as each oil change.
- 6 Keep the fuel tank sealed to prevent the entry of dust and moisture.
Frequently Asked Questions (FAQ)
Q
Will this cleaner corrode or damage metal parts and surfaces?
No. This cleaner is specifically formulated to be non-corrosive to materials. It is safe for use on metal components and will not cause surface damage when used at the recommended dilution ratio and temperature.
Q
What is the recommended water dilution ratio for this cleaner?
The recommended water-to-cleaner ratio is 3%~10%. A higher dilution ratio is achievable, which helps reduce overall usage costs while still maintaining effective cleaning performance.
Q
Is this product compliant with EU environmental regulations?
Yes. This product is fully compliant with the EU RoHS environmental directive, ensuring it meets strict standards for hazardous substance restrictions and is safe for use in environmentally conscious operations.
Q
What cleaning methods are compatible with this product?
This cleaner is compatible with two primary methods: Ultrasonic cleaning (recommended 3 minutes) followed by drip drying, and warm water rinsing (5–20 minutes) followed by drip drying. Both methods should end with air-drying or bake drying and antirust packaging.
Q
What is the ideal operating temperature for effective cleaning?
For optimal cleaning performance, the recommended temperature range is 40°C to 60°C. Operating within this range ensures efficient removal of contaminants while maintaining the safety and integrity of the parts being cleaned.
Q
How can I extend the service life of machinery and reduce maintenance costs?
Key practices include: consulting lubrication experts for correct oil specifications, labeling machinery with refueling guides, keeping oil containers clean before use, adding rust inhibitors to cooling water systems, replacing filter elements during every oil change, and keeping fuel tanks sealed to prevent contamination from dust and moisture.