0102030405
High-Performance DEPA.610MG Precision Gear Grinding Oil - Top China Suppliers & Factory
Advantages
-
⚙Very good lubricity and EP property to enhance surface finishing and dimensional control of components.
-
🔥High flash point, low oil smoke and oil mist, providing users with better safety.
-
📦One product is suitable for many operations and thus oil inventory can be minimized.
-
🛡Excellent anti-rust property to protect the metal parts from rusting even after machining.
Typical Data
| Test | Unit | Typical |
|---|---|---|
| Density | / | 0.84 |
| Viscosity @40℃ | CSt | 9.6 |
| Open flash point | ℃ | ≥180 |
| Colour | / | Yellow Transparent |
| Odour | / | Mild |
While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
Take Care
Small details that prevent you from wasting money unnecessarily
-
1Consult with lubrication experts, use lubricants of appropriate specifications, and minimize the types of oil used.
-
2Before each refueling, clean and wipe containers and tools such as oil pumps and oil pots.
-
3Before changing the oil, the machinery must be washed clean with solvent, and water-soluble cleaning agents must not be used.
-
4If any abnormalities are found in the oil product or it has reached the oil change cycle, a sample should be taken and sent to a professional company for analysis and decision.
-
5Replace the filter element at the same time as each oil change.
Frequently Asked Questions
Q
What makes this cutting oil suitable for multiple machining operations?
This oil is formulated with excellent lubricity and EP (extreme pressure) properties, allowing it to perform effectively across a wide range of machining operations including turning, milling, drilling, and grinding. Using one product for multiple applications also helps simplify inventory management.
Q
Why is a high flash point important for cutting oil?
A high flash point (≥180℃) means the oil is less likely to ignite during high-speed or high-temperature machining operations. This significantly reduces fire risk in the workshop and contributes to a safer working environment for operators.
Q
How does this oil protect machined parts from rust?
The oil contains anti-rust additives that form a protective film on metal surfaces after machining. This helps prevent oxidation and corrosion during storage or between production stages, even without additional rust-preventive treatment.
Q
How often should the cutting oil be changed?
The oil change interval depends on usage intensity, contamination levels, and operating conditions. It is recommended to monitor the oil regularly and send a sample to a professional laboratory for analysis when abnormalities are observed or when the scheduled change cycle is reached. Always replace the filter element at the same time as the oil change.
Q
Can water-soluble cleaning agents be used when changing the oil?
No. Water-soluble cleaning agents should not be used when flushing machinery before an oil change. Residual water or water-based agents can contaminate the new oil, reduce its performance, and potentially cause corrosion. Use an appropriate solvent instead to thoroughly clean the system.
Q
What viscosity grade is this cutting oil and what does it mean for performance?
This oil has a kinematic viscosity of 9.6 CSt at 40℃, which is a relatively low viscosity. This allows it to flow freely to the cutting zone, reduce friction effectively, and minimize heat buildup during machining — all of which contribute to better surface finish and tighter dimensional tolerances on finished components.