DEPA.620Ti Neat Cutting Oil
Advantages
● Suitable for all the machining operation of all the ferrous materials and their tough steel alloys.
● Effectively prolong tool life and enhance super surface finishing.
● Good anti-rust property to protect the parts from rust after machining.
● Excellent assistance for producing high precision parts.
● Ultra high heat resisting property.
Typical Data
|
Test |
Unit |
Typical |
|
Density |
/ |
0.88 |
|
Viscosity @40℃ |
CSt |
33.5 |
|
Open flash point |
℃ |
≥180 |
|
Colour |
/ |
Reddish brown transparent |
|
Odour |
/ |
Mild |
While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
Take care
Small details that prevent you from wasting money unnecessarily
1. Consult with lubrication experts, use lubricants of appropriate specifications, and minimize the types of oil used.
2. Each type of machinery is marked with a simple diagram indicating the parts that need to be refueled, the name of the oil product, the refueling cycle, etc., and is managed by a dedicated person to avoid using the wrong oil product.
3. Before each refueling, clean and wipe containers and tools such as oil pumps and oil pots.
4. Use dedicated containers for each type of oil, and label the container with the name of the oil to prevent contamination.
5. Before changing the oil, the machinery must be washed clean with solvent, and water-soluble cleaning agents must not be used.
6. After each addition or replacement of lubricating oil, keep a mechanical maintenance record.
7. If any abnormalities are found in the oil product or it has reached the oil change cycle, a sample should be taken and sent to a professional company for analysis and decision.
8. Rust inhibitor must be added to the cooling water circulation system of the injection molding machine to prevent the formation of scale, which can cause corrosion and leakage of the heat exchanger into the hydraulic system.
9. Replace the filter element at the same time as each oil change.
10. Keep the fuel tank sealed to prevent the entry of dust and moisture.
(Attention must be paid to using specialized oil pumps for various types, especially for pure oil and water-based coolant. Mixing oil pumps is extremely avoided, as it may cause corrosion and increased wear of metal parts in the equipment lubrication system. It is also possible that cutting fluid mixed with miscellaneous oil can easily breed bacteria and shorten the service life.)
description2