0102030405
DEPA.850 Soluble Cutting Fluid - Premium China Suppliers & Factory for Steel, Iron, and Aluminum Machining
✦ Advantages
- ⚙️ Multifunction for all operation and materials.
- 💧 Low foaming, good foaming performance.
- 🔩 Super lubricant performance and provide good surface finishing.
- 🛡️ Good anti-rust performance.
- 🌿 Non-sulfur and phosphorus, is harmful to the environment and health.
✦ Typical Data
| 📋 Concentrate | |
| Density (g/cm³) @ 20℃ | 1.05 |
| Appearance | Yellow transparent |
| 📋 Emulsion | |
| Appearance | Micro white transparent |
| pH Value @ 5% | 8.5 |
| Refraction Factor | 1.7 |
✦ Recommended Dilutions
- Light cutting and grinding 3 – 5%
- General machining 5%
- Medium and heavy load cutting 7 – 10%
- Heavy load cutting 10 – 20%
⚠️
While the information and figures given here are typical of current production and confirm to specification, minor variations may occur. No warranty expressed or implied is given concerning the accuracy of the information or the suitability of the products.
✦ Take Care
💡
Small details that prevent you from wasting money unnecessarily
- 1 Consult with lubrication experts, use lubricants of appropriate specifications, and minimize the types of oil used.
- 2 Each type of machinery is marked with a simple diagram indicating the parts that need to be refueled, the name of the oil product, the refueling cycle, etc., and is managed by a dedicated person to avoid using the wrong oil product.
- 3 Before each refueling, clean and wipe containers and tools such as oil pumps and oil pots.
- 4 Use dedicated containers for each type of oil, and label the container with the name of the oil to prevent contamination.
- 5 Before changing the oil, the machinery must be washed clean with solvent, and water-soluble cleaning agents must not be used.
✦ Frequently Asked Questions
Q
What types of machining operations is this cutting fluid suitable for?
This cutting fluid is a multifunctional product suitable for a wide range of operations and materials, including light cutting, grinding, general machining, medium and heavy load cutting, and heavy load cutting applications.
Q
What dilution ratio should I use for heavy load cutting?
For heavy load cutting, a dilution ratio of 10–20% is recommended. For medium and heavy load cutting, 7–10% is appropriate. Always consult with a lubrication expert to determine the best concentration for your specific application.
Q
Is this cutting fluid safe for the environment and operators?
Yes. This cutting fluid is formulated without sulfur and phosphorus, making it a more environmentally responsible and health-conscious choice compared to conventional cutting fluids that contain these harmful additives.
Q
What is the recommended pH value of the emulsion?
At a 5% concentration, the emulsion maintains a pH value of 8.5, which is mildly alkaline. This helps provide effective anti-rust protection for machined metal surfaces and equipment.
Q
How should I store and manage different types of cutting oils to avoid contamination?
Each type of oil should be stored in dedicated, clearly labeled containers. Before refueling, clean all tools such as oil pumps and oil pots thoroughly. Assign a dedicated person to manage lubrication schedules and oil types to prevent cross-contamination.
Q
What precautions should be taken when changing the cutting fluid?
Before changing the oil, all machinery must be thoroughly cleaned using an appropriate solvent. It is important not to use water-soluble cleaning agents during this process, as they may leave residues that could contaminate the new cutting fluid or affect machine performance.